five 8' extender cables for transmitter cabinet - connector blocks are approx 6" x 3" to 6" x 6"
CX-2100/URT CX-2101/URT
CX-2102/URT CX-2107/URT
CX-2108/URT
(I still need the Low Level Modulator extender cable - the big one
on left in photo)
(not shown - five additional 6' cables with smaller connectors - 1" x
1/2")
4 ea. CX-2103/URT
1 ea. CX-2104/URT
also not shown are three 8' and six 6' coaxial extender cables
one CG-246A/U two CG-960/U
one CG-530/U five CG-409/U
two 8' extender cables for booster cabinet - connector blocks are approx 6" x 4" & 6" x 6"
CX-2105/URT CX-2106/URT
(I need these two also)
photo showing typical drawer connector that transmitter cabinet extender cable plugs
into
I need the top cover (CW-287/URT-3) for the short booster cabinet
approx 16" x 26" x 1"
CB-5/URT antenna capacitor assembly
approx 9" x 13" x 15", 25 lbs.
interior - CB-5/URT antenna capacitor assembly
TS-804/URT antenna control test set
TN-197/URT antenna tuner
aprox 13" x 11" 48", 120 lbs.
interior - TN-197/URT antenna tuner
antenna tuner test set
model # unknown - TS-xxx/URT
C-915/URT remote control
approx 5" x 5" x 11"
interior - C-915/URT remote control
RFO test set - ME-88/U
drawing showing antenna capacitor assembly and antenna tuner